Gen III Hemi aluminum blocks 6.1 cranks

Stewart Way · 10-10-2016, 11:12 PM

I have 2 never used Gen III Mopar P5153896AA Hemi aluminum blocks. Really only want to sell one but might let both go for the right price. One is 4.075 and the other is 4.0815. Have been machined for roller 60mm cam bearing. Also machined for bushed lifter bores at 1.06_. No bushings so you can choose based on what lifter you use. These blocks will need a remote oil filter. They were being set up for dry sump.
Have also has about 1/2" threaded pads added to some motor mount bosses to level them out. These blocks go for around $4400 at Summit. $3000 for one of these. I can email pictures if you are interested.

Prices plus shipping.
Can call six78-873 694zero.

10-10-2016, 11:12 PM	#1
Stewart Way Member Join Date: Aug 2003 Location: Atlanta Posts: 476 Likes: 20 Liked 70 Times in 22 Posts	Gen III Hemi aluminum blocks 6.1 cranks I have 2 never used Gen III Mopar P5153896AA Hemi aluminum blocks. Really only want to sell one but might let both go for the right price. One is 4.075 and the other is 4.0815. Have been machined for roller 60mm cam bearing. Also machined for bushed lifter bores at 1.06_. No bushings so you can choose based on what lifter you use. These blocks will need a remote oil filter. They were being set up for dry sump. Have also has about 1/2" threaded pads added to some motor mount bosses to level them out. These blocks go for around $4400 at Summit. $3000 for one of these. I can email pictures if you are interested. Prices plus shipping. Can call six78-873 694zero. __________________ Stewart Way 2424 SS Last edited by Stewart Way; 10-17-2016 at 08:46 PM.