302 Ford engine and Mustang parts

John H186 · 01-05-2011, 12:10 PM

Ford 351 Windsor heads.
Part number DOOE and 351 on bottom of them.
1.94 / 1.50 valves with single springs with dampers.
Manley screw in studs with guideplates.
Port matched but not a full port (race) job.
1.6 Ford Racing (blue) roller rockers.
Hardened black pushrods (I think Manley as well).
Stock head bolts.

$400 takes everything.

RCI black plastic 10 gallon fuel cell with straps and foam. $80.

Moroso 4 inch face mechanical tire pressure gauge. Make offer.

1-inch open plastic carb spacer for 4150 carb bolt pattern. $10.

Jesel Pro Series Mohawk shaft rockers for most inline Ford heads, GT-40, AFR, etc.
Codes on bottom are BAAS60.
1.60 int / exh. Mohawk lightening slot, roller tips, tool steel adjusters, fully optioned. (These are still in the plastic sealed package and have never even seen an engine). Straight, no offsets. I don't have the steel stands, just the eight rocker pairs on shafts. Brand new, Make offer.

Call John at 732/910-2145.

Thank you for looking.

01-05-2011, 12:10 PM	#1
John H186 Member Join Date: Dec 2004 Location: New Jersey Posts: 154 Likes: 1 Liked 1 Time in 1 Post	302 Ford engine and Mustang parts Ford 351 Windsor heads. Part number DOOE and 351 on bottom of them. 1.94 / 1.50 valves with single springs with dampers. Manley screw in studs with guideplates. Port matched but not a full port (race) job. 1.6 Ford Racing (blue) roller rockers. Hardened black pushrods (I think Manley as well). Stock head bolts. $400 takes everything. RCI black plastic 10 gallon fuel cell with straps and foam. $80. Moroso 4 inch face mechanical tire pressure gauge. Make offer. 1-inch open plastic carb spacer for 4150 carb bolt pattern. $10. Jesel Pro Series Mohawk shaft rockers for most inline Ford heads, GT-40, AFR, etc. Codes on bottom are BAAS60. 1.60 int / exh. Mohawk lightening slot, roller tips, tool steel adjusters, fully optioned. (These are still in the plastic sealed package and have never even seen an engine). Straight, no offsets. I don't have the steel stands, just the eight rocker pairs on shafts. Brand new, Make offer. Call John at 732/910-2145. Thank you for looking. __________________ John Hedenburg H186 Last edited by John H186; 01-19-2011 at 12:21 PM.