Att: Ford Guys or Trans Builders

Mark Yacavone · 04-16-2008, 10:29 PM

Guys ,I need some help on this one:

I am looking for a C4 to 2300 bellhousing. They were supposedly only used in the mid 70's in Pintos, Mustang II's and Capris, making them somewhat hard to come by. Any leads would be appreciated.

602-769-0346
markyac@cox.net

(my apologies to the management if this post is in the wrong place)

FED 387 · 04-16-2008, 11:18 PM

Mark---Sent you a PM/Email too---comp 387

Dennis P Chapman · 04-17-2008, 01:36 AM

Mark
Looked in to this years ago was told bellhousing from 80's ranger
pickup with a 4cyl will work.

Notch1320 · 04-18-2008, 06:29 PM

Check out www.turboford.org. Someone there will have one for sure!

Mark Yacavone · 04-18-2008, 07:55 PM

Thanks guys . Jim Paquet doesn't have what I need.
Shawn, thanks for the turbo site link

Rory McNeil · 04-18-2008, 08:03 PM

Mark, I would imagine that something like a late 70`s-early 80`s 4 cyl. Mustang or Fairmont should have a C4. I can`t imagine it should be too hard to find a bell. I`ll keep my eyes open up here. But after all this stickshift talk, ya sure you wanna change?

Notch1320 · 04-18-2008, 09:10 PM

Mark,

Do a search on that site... you should come up with plenty. I posted your car there with a link from Racing Junk, and the site deleted it because of their rules on posting. That is one cool little car you have there! I have an 86 SVO that I am toying with as a drag car project. Turboford.org has answered many of my questions. Good Luck!

Mark Yacavone · 04-19-2008, 12:22 AM

Quote:

Originally Posted by Notch1320

Mark,

Do a search on that site... you should come up with plenty. I posted your car there with a link from Racing Junk, and the site deleted it because of their rules on posting. That is one cool little car you have there! I have an 86 SVO that I am toying with as a drag car project. Turboford.org has answered many of my questions. Good Luck!

Thanks for trying anyway. Can you just mention it in a post, non- specifically?
I am bidding on one right now. If I don't get , I'll get back on that site.

Rory, No ,I don't want to change it at all. I'd rather sell it as is, and know is the time for someone to jump on it.

Tom P · 04-19-2008, 01:18 AM

I have what i think is one ... it fits a C4 (don't tell anybody i have a slushbox kicking around) but i have no idea what block it's for. I don't have any 4 banger. Top two mounting holes are close together. I can get a casting number if you want.

Notch1320 · 04-19-2008, 02:43 AM

Mark,

They killed the post because it wasn't "my" car. Become a member, and post away.

04-16-2008, 10:29 PM	#1
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,809 Likes: 2,900 Liked 5,113 Times in 1,948 Posts	Att: Ford Guys or Trans Builders Guys ,I need some help on this one: I am looking for a C4 to 2300 bellhousing. They were supposedly only used in the mid 70's in Pintos, Mustang II's and Capris, making them somewhat hard to come by. Any leads would be appreciated. 602-769-0346 markyac@cox.net (my apologies to the management if this post is in the wrong place) __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers

04-16-2008, 11:18 PM	#2
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,416 Likes: 522 Liked 330 Times in 178 Posts	Re: Att: Ford Guys or Trans Builders Mark---Sent you a PM/Email too---comp 387

04-17-2008, 01:36 AM	#3
Dennis P Chapman VIP Member Join Date: Jun 2007 Location: Toms River NJ Posts: 1,594 Likes: 415 Liked 53 Times in 25 Posts	Re: Att: Ford Guys or Trans Builders Mark Looked in to this years ago was told bellhousing from 80's ranger pickup with a 4cyl will work. __________________ Dennis P Chapman 1904 STK NHRA National Record Holder Car Owner.

04-18-2008, 06:29 PM	#4
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Re: Att: Ford Guys or Trans Builders Check out www.turboford.org. Someone there will have one for sure! __________________ Shawn Allsup K/S 718

04-18-2008, 07:55 PM	#5
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,809 Likes: 2,900 Liked 5,113 Times in 1,948 Posts	Re: Att: Ford Guys or Trans Builders Thanks guys . Jim Paquet doesn't have what I need. Shawn, thanks for the turbo site link __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers

04-18-2008, 08:03 PM	#6
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,311 Likes: 314 Liked 1,102 Times in 301 Posts	Re: Att: Ford Guys or Trans Builders Mark, I would imagine that something like a late 70`s-early 80`s 4 cyl. Mustang or Fairmont should have a C4. I can`t imagine it should be too hard to find a bell. I`ll keep my eyes open up here. But after all this stickshift talk, ya sure you wanna change? __________________ NHRA 6390 STK M/S 85 Mustang

04-18-2008, 09:10 PM	#7
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Re: Att: Ford Guys or Trans Builders Mark, Do a search on that site... you should come up with plenty. I posted your car there with a link from Racing Junk, and the site deleted it because of their rules on posting. That is one cool little car you have there! I have an 86 SVO that I am toying with as a drag car project. Turboford.org has answered many of my questions. Good Luck! __________________ Shawn Allsup K/S 718

04-19-2008, 01:18 AM	#9
Tom P Senior Member Join Date: Mar 2002 Posts: 707 Likes: 30 Liked 239 Times in 94 Posts	Re: Att: Ford Guys or Trans Builders I have what i think is one ... it fits a C4 (don't tell anybody i have a slushbox kicking around) but i have no idea what block it's for. I don't have any 4 banger. Top two mounting holes are close together. I can get a casting number if you want.

04-19-2008, 02:43 AM	#10
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Re: Att: Ford Guys or Trans Builders Mark, They killed the post because it wasn't "my" car. Become a member, and post away. __________________ Shawn Allsup K/S 718