HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-13-2022, 05:30 PM   #1
NHRA1926
Member
 
NHRA1926's Avatar
 
Join Date: Dec 2015
Location: Bowling green, Ky
Posts: 236
Likes: 12
Liked 222 Times in 66 Posts
Default Turbo Action Shifter Issue

Hoping someone can help me with this. I removed my Turbo Action Cheetah shifter for some roll cage updates, now the shifter will not move down into 3rd gear. It's a reverse pattern shifter. It is not hooked up to the transmission, as I am waiting for the engine rebuild to be finished, and the transmission is also out of the car. It moves freely from park all the way through 2nd gear. If I remove the hold down bracket holding the cable to the mounting plate on the shifter inside the car, it will go into 3rd gear, but it moves the whole shifter cable, case and all. It's almost like the cable it binding, but the end of the cable where it attaches to the transmission still has room to move. I did adjust the neutral safety switch thinking it was stopping the shifter from going all the way to the rear, but that did not solve the issue. Any ideas? Thanks.
NHRA1926 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.