|
10-25-2020, 08:03 PM | #1 |
Member
Join Date: Mar 2003
Location: cincinnati ohio
Posts: 206
Likes: 204
Liked 190 Times in 31 Posts
|
231 v6 trans
What transmission are the guys using on the 231 firebirds in stock ? Rick .
__________________
Rick Winchester Stk 3277 |
10-25-2020, 08:22 PM | #2 | |
VIP Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 4,969
Likes: 1,136
Liked 1,218 Times in 313 Posts
|
Re: 231 v6 trans
Quote:
I would suspect a TH 200 Metric.The 4 speed automatics are big, heavy, and suck up HP that the V6 doesn't have. A legal "clutch assisted" 5 speed would probably run well.
__________________
Alan Roehrich 212A G/S |
|
10-25-2020, 08:32 PM | #3 |
Member
Join Date: Jan 2004
Location: Belmont N.S. Canada
Posts: 467
Likes: 224
Liked 154 Times in 68 Posts
|
Re: 231 v6 trans
I know the one of Chin Racing has a M200. Although likely scarce as hens teeth they were made with a 60 degree v6 bellhousing for the early 3rd gen camaros.
__________________
Chris Chapman 1969 Chevelle NHRA F-G/SA 1090 |
Liked |
10-25-2020, 10:58 PM | #4 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,635
Likes: 2,747
Liked 4,805 Times in 1,828 Posts
|
Re: 231 v6 trans
Quote:
Could have been from a Camaro, but the 1st gen . S 10 also had the that style behind the 2.8 and the 2.5 engines..Might be a little easier to find.
__________________
Real life never quite adds up.... Jay Farrar |
|
10-26-2020, 09:58 AM | #5 |
Member
Join Date: Mar 2003
Location: cincinnati ohio
Posts: 206
Likes: 204
Liked 190 Times in 31 Posts
|
Re: 231 v6 trans
Thanks guys, saw one for sale real cheap. Thought it would make a low dollar stocker /bracket car for 12yr old grandson to learn on. Rick
__________________
Rick Winchester Stk 3277 |
Liked |
10-26-2020, 10:43 AM | #6 |
Member
Join Date: Mar 2007
Location: Lake Orion, Michigan
Posts: 336
Likes: 10
Liked 53 Times in 13 Posts
|
Re: 231 v6 trans
The 231 is a Buick engine and it's a 90 degree V6. The 2.8 in the S-10 is a 60 degree V-6 and it's completely differrent.
|
10-26-2020, 12:13 PM | #7 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,635
Likes: 2,747
Liked 4,805 Times in 1,828 Posts
|
Re: 231 v6 trans
That it is..but all Buick 90 degree V6's that were also used in FWD cars, had the GM FWD bell housing pattern..and that includes the 3800 Series III that was used in the Firebird /Camaro.
__________________
Real life never quite adds up.... Jay Farrar |
Liked |
10-26-2020, 12:17 PM | #8 | |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 895
Likes: 67
Liked 230 Times in 108 Posts
|
Re: 231 v6 trans
Quote:
Later in the development of the 3.8 L Buick they changed the Bellhousing style to the GM small bell configuration . The Buick V-6 used to have the BOP bell , but when that engine was re-done to the Buick 3800 the bell was changed to the GM small bell , so the block was different and was used even in RWD vehicles like the 4th gen Firebirds and Camaros with that small bell . My street car is a 1996 Firebird with a 3800 and it has a 4L60e with that small bellhousing . The small bell was used on the Chevy 2.8 , 3.1 , and 3.4 L engines . |
|
10-26-2020, 04:46 PM | #9 |
Senior Member
Join Date: Jan 2002
Posts: 654
Likes: 8
Liked 244 Times in 26 Posts
|
Re: 231 v6 trans
You need the C10 pickup for your grandson.
|
Liked |
Thread Tools | |
Display Modes | |
|
|