|
![]() |
#1 |
Senior Member
Join Date: Feb 2009
Posts: 967
Likes: 419
Liked 200 Times in 91 Posts
|
![]()
its tuff looking in there during assembly to see/measure the rod or rod bolt to camshaft lobe clearance...(scat h/beam rods and roller cam) any tips would help please/thankyou...
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Apr 2007
Posts: 196
Likes: 7
Liked 10 Times in 4 Posts
|
![]()
Smaller base circle cam and stroker rods seem to work well for us but we still check. Its not easy but not that bad.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Feb 2009
Posts: 967
Likes: 419
Liked 200 Times in 91 Posts
|
![]()
tks. JC. yes on the small base circle cam. now I'm finding it tight between counter weights and piston pin bosses...shooting for .060'' there.
|
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Apr 2017
Posts: 93
Likes: 19
Liked 30 Times in 16 Posts
|
![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|