CLASS RACER FORUM - View Single Post - Crane Cam F-288/4134-6

pmrphil · 05-30-2022, 08:43 AM

Just by the part number that cam has a 106 lobe separation. Not quite sure when you say 108 centerline what you mean? Also, what is 12 degrees retarded? If the cam is in at 96 intake centerline, it would be advanced too far. I would probably install that cam around 103, depending on how loose the converter is, where you plan to shift, etc. Good luck.

05-30-2022, 08:43 AM	#2
pmrphil Member Join Date: Aug 2010 Location: CT Posts: 381 Likes: 1,246 Liked 246 Times in 105 Posts	Re: Crane Cam F-288/4134-6 Just by the part number that cam has a 106 lobe separation. Not quite sure when you say 108 centerline what you mean? Also, what is 12 degrees retarded? If the cam is in at 96 intake centerline, it would be advanced too far. I would probably install that cam around 103, depending on how loose the converter is, where you plan to shift, etc. Good luck. __________________ Phil Molski S/C 1623 Last edited by pmrphil; 05-30-2022 at 08:45 AM.