Quote:
Originally Posted by StompNDump
When you say separate timer for the shift, you are referring to an entire different timer box correct?
|
Yes, you can use some other method of controlling the shift if you really want to use a SLC. Something like these:
https://www.summitracing.com/parts/ded-st1/overview/
https://www.jegs.com/i/Biondo/376/DDI-1068/10002/-1
I'd highly recommend the Biondo box if you go this route, since it can do RPM or time and the cost is equal.
If you are using a MSD Digital 7 or Grid ignition, you can control the shift directly from that too.