Thread: O2 Reading
View Single Post
Old 05-01-2019, 12:22 PM   #3
Tom Goldman
VIP Member
 
Tom Goldman's Avatar
 
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,433
Likes: 770
Liked 696 Times in 201 Posts
Default Re: O2 Reading

Hi Cal. If you are going to Atco this weekend .I can give you a quick crash course on what to look for .
O2's in the collector can be difficult to get real world readings on a throttle stop car. Stockers use them in the collector ,but usually just to let the car fine tune in closed loop mode.
The top tuners use individual cylinder readings.
The best readings are gained from an individual cylinder about 12" or less from the port .
You also need to go into the configuration file for the O2 and smooth out the graph peaks so you can get a readable average reading.
13, 14 To one AFR in the collector is not necessarily too lean . At an individual cylinder it might be in the mid to high 12's .
You also have to make sure you have done a free air calibration on the Sensor.
.90 throttle stop cars usually like around 12.8 -13.2 AFR.
__________________
Tom Goldman 1500 SG , 1506 STK
Tom Goldman is offline   Reply With Quote