CLASS RACER FORUM - View Single Post

4spdJohnny · 02-12-2020, 05:30 PM

I am "restoring" a older DR4 for a friend. I am looking for a "chevy" length input. Will take either a 26 spline or a 18 spline. The trans has no serial number but it is a early 90's drag box as near as George at Jerico and I can tell. The problem I'm running into is all the inputs I'm finding the distance between the snap ring grooves outside to outside is either narrower (at 2.240) or wider (at 2.54) This trans has the older 209 bearing with the larger 1.770 bearing register but has "wide" gears so the snap ring groove width is 2.340. Please let me know any info call or text if you have an input, thanks!

John A. McLaughlin
605-237-8673

02-12-2020, 05:30 PM	#1
4spdJohnny Member Join Date: Aug 2010 Location: Grand Forks ND Posts: 239 Likes: 457 Liked 119 Times in 42 Posts	Want to buy Jerico parts I am "restoring" a older DR4 for a friend. I am looking for a "chevy" length input. Will take either a 26 spline or a 18 spline. The trans has no serial number but it is a early 90's drag box as near as George at Jerico and I can tell. The problem I'm running into is all the inputs I'm finding the distance between the snap ring grooves outside to outside is either narrower (at 2.240) or wider (at 2.54) This trans has the older 209 bearing with the larger 1.770 bearing register but has "wide" gears so the snap ring groove width is 2.340. Please let me know any info call or text if you have an input, thanks! John A. McLaughlin 605-237-8673 __________________ John A. McLaughlin 5757 B/S 440-6 or G/S 383 70 Road Runner, Dad's 5096 K/SA 70 Two Ton Tamater, Taylor's,Alec,Breezy