CLASS RACER FORUM - View Single Post

348 · 08-09-2008, 03:19 PM

Either borrow or buy an MSD tester and hook it up in place of the cranktrigger. This way you can simulate a full run without starting the engine.Have the driver get in with all his gear on and make a simulated run.In my case I found out when I would turn the wheel slightly the wires for the line lock would touch momentaerly and activate the chip for the burnout. Plus this gives you the ability to rerout wires temperarly to see if it cures your problem or not.
Bill

08-09-2008, 03:19 PM	#2
348 Junior Member Join Date: Aug 2007 Posts: 3 Likes: 0 Liked 0 Times in 0 Posts	Re: msd ignition Either borrow or buy an MSD tester and hook it up in place of the cranktrigger. This way you can simulate a full run without starting the engine.Have the driver get in with all his gear on and make a simulated run.In my case I found out when I would turn the wheel slightly the wires for the line lock would touch momentaerly and activate the chip for the burnout. Plus this gives you the ability to rerout wires temperarly to see if it cures your problem or not. Bill __________________ Bill Hurst S/C348H ET348H