View Single Post
Old 06-14-2025, 07:35 AM   #3
Dan Fahey
VIP Member
 
Dan Fahey's Avatar
 
Join Date: Oct 2008
Posts: 2,128
Likes: 1,084
Liked 184 Times in 113 Posts
Default Re: 1995 G.M. factory ECM question

Quote:
Originally Posted by e vassar View Post
I have a 95 Firebird T/A LT1
It is bone stock except for headers, 3.73 rear gears and ABS has been removed.
I am going to need a ECM. I have seen them advertised from $150 to $800..what is the difference? None that I can see. Some of them get flashed with the receiving vehicles VIN which may be for security systems.
Can I just take an ECM out of any old 95 LT1 Firebird / Camaro?
Thanks...
Short answer YES.
1995 LT1 uses the GM ODB1 ECM also called PCM.
I have 3 Modified PCM's.

There is a Reluctor available.
1995 Pontiac Firebird Trans Am came with a 10-bolt, 7.5" rear end.

Buying another 95 F Body PCM is good enough for normal driving.
Needs to be tuned for your vehicle.
Especially the speedometer.

The ABS light will remain on in the dash.
Can remove the Bulb.
Opportunity to replace burned out bulbs or upgrade to brighter ones

To do the tuning purchase TunerCat and Cables for your Laptop.
Plus one file specifically for your 95 Firebird.
TC will send instructions to get everything working.

For custom tune, there are several ODB1 Tuners out there.
Can email a Customized .BIN for your car to Download.
FWIW ODB1 PCM are hardwired for a 7000rpm max RPM.

Hope this information helps.

Dan

Last edited by Dan Fahey; 06-14-2025 at 07:39 AM.
Dan Fahey is offline   Reply With Quote