CLASS RACER FORUM - View Single Post

Robin Lawrence · 05-01-2024, 07:38 AM

The BCM is not required for the windows. The door harnesses use the door handle switch to activate the drop in the window as the door is opened to clear the door seal.

When I built my CJ I used the stock connectors in the door jambs. There are a couple of wires from the driver side that are needed to mate the system. I powered the positives in the wires that went through the stock harness in the door jambs and it all worked.

Before I was able to complete the wiring I located a NOS CJ Harness and used that.

Robin

05-01-2024, 07:38 AM	#5
Robin Lawrence Sponsor Join Date: Jan 2002 Location: Galesburg IL. Posts: 165 Likes: 216 Liked 638 Times in 109 Posts	Re: 2014 cj power windows The BCM is not required for the windows. The door harnesses use the door handle switch to activate the drop in the window as the door is opened to clear the door seal. When I built my CJ I used the stock connectors in the door jambs. There are a couple of wires from the driver side that are needed to mate the system. I powered the positives in the wires that went through the stock harness in the door jambs and it all worked. Before I was able to complete the wiring I located a NOS CJ Harness and used that. Robin __________________ STK 308 SS 3088