CLASS RACER FORUM - View Single Post

KRatcliff · 12-19-2021, 12:43 PM

Fresh with zero runs LT1 stocker motor. Heads freshened by Gary Hettler. LT1 non filled block. It is my alternate motor that I also have the sequential tune ready for a FAST XFI if that is what you run. The injectors are flowed and staggered for this motor that matches the tune.
New rings, bearings, etc... Originally built by Jeff Warren with a few of my own improvements such as cam grind, solid roller lifters, Manton pushrods, Crane roller rockers, MSD Opti with my water jet cut disc ready for sequential tuning, new plug wires, harmonic balancer, water pump (properly blocked), and everything else you see in the pictures except for the flywheel and clutch (those two are not included). This motor is ready to drop in and it is fast. Well, at least it is fast in my car so I can't speak for anything other than that.

$14,000 and I will deliver or meet you up to 300 miles.

Wrong section. I asked it to be moved.

12-19-2021, 12:43 PM	#1
KRatcliff Senior Member Join Date: Sep 2011 Posts: 766 Likes: 75 Liked 524 Times in 141 Posts	LT1 Stocker Motor Fresh with zero runs LT1 stocker motor. Heads freshened by Gary Hettler. LT1 non filled block. It is my alternate motor that I also have the sequential tune ready for a FAST XFI if that is what you run. The injectors are flowed and staggered for this motor that matches the tune. New rings, bearings, etc... Originally built by Jeff Warren with a few of my own improvements such as cam grind, solid roller lifters, Manton pushrods, Crane roller rockers, MSD Opti with my water jet cut disc ready for sequential tuning, new plug wires, harmonic balancer, water pump (properly blocked), and everything else you see in the pictures except for the flywheel and clutch (those two are not included). This motor is ready to drop in and it is fast. Well, at least it is fast in my car so I can't speak for anything other than that. $14,000 and I will deliver or meet you up to 300 miles. Wrong section. I asked it to be moved. Attached Thumbnails Last edited by KRatcliff; 12-19-2021 at 12:48 PM.