CLASS RACER FORUM - View Single Post - Racepak, MSD, Strange, Barry Grant, Cylinder Heads, Intakes

3354 C/AA · 11-14-2021, 11:09 PM

***Gear Sets***
Strange Aluminum Carrier (Used) ***$950***
*40 Spline Strange Steel Spool (Used)
*Low drag Ball Bearing Pinion Support (used)
*4.88 Richmond 9310 Pro Gears (Used)
*Includes Shipping Container

***Ignition Boxes***
MSD 7530T Ignition box (Used) ***$390***
* Tested good from MSD
* OE Harness and cable included

***HEADERS & COLLECTORS***
Dynatech Merge Collectors (Used) ***$175 each***
*2.125 primary, 3.5 outlet. Factory Ceramic coated

***Shocks and Springs***
Koni Electric Shocks ***$1000***
* Used 2010 to 2014 Season
* GMM Air Sweeps
* Gen 2 MSD Style Control Box
* Comes with spring Bearings

Eibach 2.5x14.00 200# Springs (Pair) Used ***$50***
Eibach 2.5x8.00 200# Springs (Pair) Used ***$50***
Eibach 2.5x8.00 225# Springs (Pair) Used ***$50***
Eibach 2.5x8.00 300# Springs (Pair) NEW! ***$50***

***Engine Valve Springs***
PAC-1370L QTY 8 NEW! ***$250***
PAC-1355H QTY 13 NEW! ***$300***

***Fuel System***
Barry Grant 400 Fuel Pump (Used) ***$125 each***

Barry Grant 2 port regulator (Used) ***$25***

***TRE Tunnel Ram Dominators (Used) ***$1200***
* Holley 4500 Style
* 1.83 Venturi
* 2.125 Blades
* Billet metering Blocks

***Engine Top End***
*2013 MBE Splayed Valve Cylinder Heads 16 Runs Last Freshened 04/2018 ***$7500***
*These are MBE/DART Casting, cast Heads. No GM Part Number
*Xceledyne CRN Titanium Intake Valves
*Victory DLC Titanium Exhaust Valves
*Setup for PAC 1355H
*Jesel Aluminum (solid body) Rocker Arm Set with hardware and Stands
*2.0 Pivot Length
*1.85 Intake Ratio
*1.85 Exhaust Ratio (1.75 Ratio available as Option or in additional for extra $800)
*Ball Type Adjuster
*Needle Nose Bearings
*-10 Vacuum Pump Connection
*HRE Intake Manifold, Dual 4500 Top, includes drop-ins, Billet Runners, -12 Vacuum Pump connection, For 8.900 Deck

11-14-2021, 11:09 PM	#1
3354 C/AA Junior Member Join Date: Jan 2021 Location: Neenah, WI Posts: 9 Likes: 0 Liked 1 Time in 1 Post	Racepak, MSD, Strange, Barry Grant, Cylinder Heads, Intakes *Gear Sets* Strange Aluminum Carrier (Used) *$950* 40 Spline Strange Steel Spool (Used) Low drag Ball Bearing Pinion Support (used) 4.88 Richmond 9310 Pro Gears (Used) Includes Shipping Container *Ignition Boxes* MSD 7530T Ignition box (Used) *$390* * Tested good from MSD * OE Harness and cable included *HEADERS & COLLECTORS* Dynatech Merge Collectors (Used) *$175 each* 2.125 primary, 3.5 outlet. Factory Ceramic coated Shocks and Springs* Koni Electric Shocks *$1000* * Used 2010 to 2014 Season * GMM Air Sweeps * Gen 2 MSD Style Control Box * Comes with spring Bearings Eibach 2.5x14.00 200# Springs (Pair) Used *$50* Eibach 2.5x8.00 200# Springs (Pair) Used *$50* Eibach 2.5x8.00 225# Springs (Pair) Used *$50* Eibach 2.5x8.00 300# Springs (Pair) NEW! *$50* *Engine Valve Springs* PAC-1370L QTY 8 NEW! *$250* PAC-1355H QTY 13 NEW! *$300* *Fuel System* Barry Grant 400 Fuel Pump (Used) *$125 each* Barry Grant 2 port regulator (Used) *$25* *TRE Tunnel Ram Dominators (Used) $1200** * Holley 4500 Style * 1.83 Venturi * 2.125 Blades * Billet metering Blocks *Engine Top End* 2013 MBE Splayed Valve Cylinder Heads 16 Runs Last Freshened 04/2018 $7500* These are MBE/DART Casting, cast Heads. No GM Part Number Xceledyne CRN Titanium Intake Valves Victory DLC Titanium Exhaust Valves Setup for PAC 1355H Jesel Aluminum (solid body) Rocker Arm Set with hardware and Stands 2.0 Pivot Length 1.85 Intake Ratio 1.85 Exhaust Ratio (1.75 Ratio available as Option or in additional for extra $800) Ball Type Adjuster Needle Nose Bearings -10 Vacuum Pump Connection HRE Intake Manifold, Dual 4500 Top, includes drop-ins, Billet Runners, -12 Vacuum Pump connection, For 8.900 Deck Last edited by 3354 C/AA; 04-08-2022 at 04:20 PM. Reason: 7AL2 is now sold