CLASS RACER FORUM - View Single Post - Micro Welding of bearing shell to rod housing bore

Larry Hill · 08-22-2021, 02:45 PM

The welding on my 440 stocker engine is on the piston side of the rod. If the rod parting line would be 3 o’clock and 9 o’clock with 6 o’clock on the piston side. The most of the transfer of metal is between 3:30 and 4:30 on one side and between 8:30 and 7:30 on the other side, with very little if any at the 6:00 o’clock position. Rod and piston approx 1750 grams.

08-22-2021, 02:45 PM	#2
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,640 Likes: 1,937 Liked 10,711 Times in 2,230 Posts	Re: Micro Welding of bearing shell to rod housing bore The welding on my 440 stocker engine is on the piston side of the rod. If the rod parting line would be 3 o’clock and 9 o’clock with 6 o’clock on the piston side. The most of the transfer of metal is between 3:30 and 4:30 on one side and between 8:30 and 7:30 on the other side, with very little if any at the 6:00 o’clock position. Rod and piston approx 1750 grams. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817