Quote:
Originally Posted by Jason Shepard
Right now i have stock arms and bushings, running traction bars. The stock bushings move forward and back more than I would like. I can get solid bushings, but not sure how that will affect things. What are some opinions?
|
Jason we had a problem like you have but our problem was with the attachment points on the frame of our G-Body car they were elongated. what I did was installed new Grade-8 Bolts and Grade 8 Washers on all the bars both ends we used a solid bar at the bottom and adjustable bars at the top I set the rear end at the ride height and checked the measurement from the back wheels to front wheels then Tacked welded the washers to the frame. We've had the rear end out since we did that and there is no sign of wear on the washers they were fender washers about 1/8-3/16 thick 2" in diameter.
Kenney Kelley
.