Quote:
Originally Posted by Chris Hill
Is there any device that will allow a controlled clutch engagement during launch for a streetcar using a stock clutch?
This is for my stock 2016 Scat pack Challenger.
|
Here's some links to devices that are designed to reduce initial clamp pressure...
http://magnusmotorsports.com/product/magnus-launch-control-device/
http://tiltonracing.com/wp-content/uploads/2013/07/98-1280-Flow-Control-Valve.pdf
http://www.clutchmasters.com/content/FCV2000diagram.pdf
http://ClutchTamer.com
I'm the "screen door" / ClutchTamer guy, feel free to ask any questions you might have. I don't have a version specifically designed for your Challenger, so a ClutchTamer install is likely going to be more involved than installing one of the in-line devices above. I say likely because I have heard bleeding the clutch on those cars can be quite a chore.
Here's a link to my
Initial Setup & Tuning Guide. If you only want to add a little slip, that's no problem. A little slip goes a long way in reducing the impact that gets passed along to your stock IRS.
Grant