CLASS RACER FORUM - View Single Post

Mike Taylor 3601 · 05-19-2016, 12:57 PM

I use precision products performance center(PPPC) tool steel lifters, they oil the rockers right( don't flood) and have ran them 450+ runs with 475lbs springs.
Break in required,using 1409Xpac spring' I break in with stock LS springs,was using break in rockers but springs now have too much pressure,break in rockers won't drop it low enough to be safe.
springs are easy to change installed height set, so just pop LS off and 1409X right back on.
If lifter has .015'' travel it is considered "hydraulic".
Mike Taylor 3601

05-19-2016, 12:57 PM	#5
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,374 Likes: 358 Liked 308 Times in 103 Posts	Re: Best lifter? I use precision products performance center(PPPC) tool steel lifters, they oil the rockers right( don't flood) and have ran them 450+ runs with 475lbs springs. Break in required,using 1409Xpac spring' I break in with stock LS springs,was using break in rockers but springs now have too much pressure,break in rockers won't drop it low enough to be safe. springs are easy to change installed height set, so just pop LS off and 1409X right back on. If lifter has .015'' travel it is considered "hydraulic". Mike Taylor 3601 Last edited by Mike Taylor 3601; 05-19-2016 at 01:05 PM.