CLASS RACER FORUM - View Single Post - DragPak owners high steering effort problems

Tom Goldman · 03-12-2016, 10:58 AM

Drag pack Challenger owners should beware of potential problems arising with the OEM steering shaft due to the high effort of the manual rack.
The lower column on a DragPak in my shop is twisted in the collapsible section of the shaft . The Knee knuckle at the top of the shaft also shows signs of twisting.
On the first DragPak I built , I eliminated this part during the build because it looked weak ,this confirms that .
Some of the NHRA tech guys are aware of the weak appearing knuckle and would like to see them replaced .
If any of you need info on how I replaced the shaft ,you can send me a PM .
Its a relatively simple fix for a potential problem.

03-12-2016, 10:58 AM	#1
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,476 Likes: 889 Liked 882 Times in 236 Posts	DragPak owners high steering effort problems Drag pack Challenger owners should beware of potential problems arising with the OEM steering shaft due to the high effort of the manual rack. The lower column on a DragPak in my shop is twisted in the collapsible section of the shaft . The Knee knuckle at the top of the shaft also shows signs of twisting. On the first DragPak I built , I eliminated this part during the build because it looked weak ,this confirms that . Some of the NHRA tech guys are aware of the weak appearing knuckle and would like to see them replaced . If any of you need info on how I replaced the shaft ,you can send me a PM . Its a relatively simple fix for a potential problem. Attached Thumbnails __________________ Tom Goldman 1500 SG , 1506 STK Last edited by Tom Goldman; 12-27-2017 at 02:53 PM.