CLASS RACER FORUM - View Single Post - Ford vs Chevy Build-up

HandOverFist · 05-05-2015, 01:13 AM

Thanks Brian - I need to weld another bung in the collector for the wideband before Saturday for sure. If I understand this PMS correctly when in standalone mode it will try to maintain a 12.8 A/F ratio. I may in the end need to take it out of standalone and manually input data to get it leaner at WOT.

You were correct about the timing advancing wildly under light load...I have seen up to 42 degrees winging the engine at the shop in the controller screen. It would probably be money well spent to invest in some type of recorder to review all parameters with known settings after a blast down the track. Considering this... http://www.andersonfordmotorsport.co...icro-flashacq/

05-05-2015, 01:13 AM	#418
HandOverFist VIP Member Join Date: Oct 2013 Location: Gulf Breeze, FL Posts: 1,651 Likes: 8 Liked 33 Times in 16 Posts	Re: Ford vs Chevy Build-up Thanks Brian - I need to weld another bung in the collector for the wideband before Saturday for sure. If I understand this PMS correctly when in standalone mode it will try to maintain a 12.8 A/F ratio. I may in the end need to take it out of standalone and manually input data to get it leaner at WOT. You were correct about the timing advancing wildly under light load...I have seen up to 42 degrees winging the engine at the shop in the controller screen. It would probably be money well spent to invest in some type of recorder to review all parameters with known settings after a blast down the track. Considering this... http://www.andersonfordmotorsport.co...icro-flashacq/ __________________ Rich Taylor I/SA - 321 Last edited by HandOverFist; 05-05-2015 at 01:28 AM.