CLASS RACER FORUM - View Single Post - 12 Bolt GM Complete and Other 12 Bolt Parts

Gary Merrick · 07-13-2014, 10:28 PM

“USED” GM 12 Bolt complete with Strange 33 Spline Axles, Strange Steel Spool, Mark Williams Steel Cap on Driver’s side of Spool, C-Clip eliminators, 5.14 (9310) Motive Gear with less than 20 runs, Calvert re-enforced Perches, Aluminum Brake Drums, and Chrome Cover. $1,375.00 plus shipping

“NEW” Moser Engineering Aluminum Differential Cover for GM 12 Bolt. $125.00 plus shipping

“NEW” Bare Moser Engineering GM 12 Bolt Housing (Older – Original 12 Bolt Style) $700.00 plus shipping

“NEW” Moser Symmetrical (3 inch on center) Weld-on Ends – 3/8” Tee Bolt kit included $85.00 plus shipping

Two Strange H1131A Symmetrical 3/8” threaded (3 inch on center) Weld-on Ends – One is NEW, the other was cut off of a housing, squared in a lathe and was never used. $85.00 plus shipping.

Used 12 Bolt Gears – one 4.88 and one 5.14 - $95.00 each plus shipping
.

Gary Merrick
330-219-4738

07-13-2014, 10:28 PM	#1
Gary Merrick Member Join Date: Sep 2007 Posts: 210 Likes: 435 Liked 196 Times in 29 Posts	12 Bolt GM Complete and Other 12 Bolt Parts “USED” GM 12 Bolt complete with Strange 33 Spline Axles, Strange Steel Spool, Mark Williams Steel Cap on Driver’s side of Spool, C-Clip eliminators, 5.14 (9310) Motive Gear with less than 20 runs, Calvert re-enforced Perches, Aluminum Brake Drums, and Chrome Cover. $1,375.00 plus shipping “NEW” Moser Engineering Aluminum Differential Cover for GM 12 Bolt. $125.00 plus shipping “NEW” Bare Moser Engineering GM 12 Bolt Housing (Older – Original 12 Bolt Style) $700.00 plus shipping “NEW” Moser Symmetrical (3 inch on center) Weld-on Ends – 3/8” Tee Bolt kit included $85.00 plus shipping Two Strange H1131A Symmetrical 3/8” threaded (3 inch on center) Weld-on Ends – One is NEW, the other was cut off of a housing, squared in a lathe and was never used. $85.00 plus shipping. Used 12 Bolt Gears – one 4.88 and one 5.14 - $95.00 each plus shipping . Gary Merrick 330-219-4738 Last edited by Gary Merrick; 07-24-2014 at 04:29 PM. Reason: Date for delivery has passed.