Quote:
Originally Posted by John Nechiporchik
This car has a crank trigger....I believe that is why there is no harness connected to the receptacle for the optic sensor module.
However, The opening where the harness would connect is a direct path to allow water into the dist.cap/rotor area. I looked in ther with a flashlight and thwere was definitely moisture on the sensor terminals. Put a Q-tip in there and definitely came out wet.
If leak down does not show anything, tomorrow I remove cap/rotor.
|
If you got water inside of the Optispark plan on replacing the cap and rotor. In the future fill that plug for the optical sensor with silicone.