CLASS RACER FORUM - View Single Post

Alan Roehrich · 06-09-2014, 06:49 PM

It depends upon how much other work has been done on the block.

The cost of a sleeve and installation varies widely.

I use special sleeves made like diesel sleeves, the sleeves themselves are around $100 each, but they're made of superior material, and have a flange on top, they won't move. Then there is the cost of installation. As much as $100 per sleeve.

Some people install inexpensive sleeves, and get $125 or so each for the sleeve and installation.

You'd have to hone #5 and #6 back round, sleeving the block will push them out of round.

06-09-2014, 06:49 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,113 Likes: 1,571 Liked 1,825 Times in 414 Posts	Re: Cylinder sleeves It depends upon how much other work has been done on the block. The cost of a sleeve and installation varies widely. I use special sleeves made like diesel sleeves, the sleeves themselves are around $100 each, but they're made of superior material, and have a flange on top, they won't move. Then there is the cost of installation. As much as $100 per sleeve. Some people install inexpensive sleeves, and get $125 or so each for the sleeve and installation. You'd have to hone #5 and #6 back round, sleeving the block will push them out of round. __________________ Alan Roehrich 212A G/S