CLASS RACER FORUM - View Single Post

Ken Kopecky · 07-31-2013, 12:57 PM

Hi Jack. As Dennis indicated, I redid the wiring, checked all grounds and connections, replaced the entire ignition and fuel systems, new distributor, tach, shift light, batteries, carb, master battery cutoff switch, and retested the MSD setup twice. Still didn't fix the problem. I also checked the cam lift at the vavle, valve lash and static compression in the engine. All checked fine.

Ken

07-31-2013, 12:57 PM	#1
Ken Kopecky Member Join Date: Aug 2005 Location: Edison, NJ Posts: 235 Likes: 374 Liked 273 Times in 56 Posts	Re: Chassis dyno in New Jersey Hi Jack. As Dennis indicated, I redid the wiring, checked all grounds and connections, replaced the entire ignition and fuel systems, new distributor, tach, shift light, batteries, carb, master battery cutoff switch, and retested the MSD setup twice. Still didn't fix the problem. I also checked the cam lift at the vavle, valve lash and static compression in the engine. All checked fine. Ken