Re: BG regulator
It's a special 1/2" NPT fitting that is ported on the NPT side, larger I.D. than the AN side. of the fitting. Here's the text directly from the BG catalog right next to the 2-Port Plus Regulator-
NOTE: Be sure to use a 1/2" NPT adapter fitting on the regulator's inlet that has a minimum I.D. of .530". Fittings with a smaller I.D. on the pipe thread side will interfere with the inlet side function of the regulator.
If you don't have this special fitting, you could easily enlarge the inlet side.
__________________
Jim Kaekel 3836 STK
|