Thread: Spring sale
View Single Post
Old 03-24-2013, 03:36 PM   #1
Bob Lasko
Senior Member
 
Bob Lasko's Avatar
 
Join Date: Jan 2002
Location: Wilton,CT
Posts: 630
Likes: 0
Liked 186 Times in 55 Posts
Default Spring sale

Crower Severe Duty roller Lifters (no off set)SBC Part #66290X903H. Has only 40 run on lifters. 300.00

MGP Aluminum Rods length 5.70, 2.00 rod ends with 0.927 pin.
Wrist pin holes have been bushed . Have only 30 runs. 300.00

BME Aluminum Rods, 265 Forging. Length 6.00. 2-inch rod end.0.927 pin. Used 40 runs. 200.00

BG 400 Fuel Pump. With return. This pump is new and was only used for 3 runs when my pump did not work. 200.00

K-Motion valve springs K-1500. 75.00

SBC Morose die cast Aluminum Valve covers, with AN Bungs installed 75.00

Peterson Vacuum Regulator 75.00

ACD Three Speed shifter control Digital. 175.00

Manley Titanium Valve Spring retainers for triple springs 1.625
diameter 75.00

SBC Ferrea Head Gaskets, NEW for 4.125 bore x .045 thick part #G50000 75.00

Strange 9 inch nodular center section. 35 Spline spool with Aluminum bearing support. Has 6.00 gears. Need to be replaced. 700.00

Auto Meter Fuel Pressure Gauge pro Comp, 2 5/8 diameter. new 50.00

82-92 Camaro Tilt Steering colunm with wheel 175.00

All Shipping for parts, to be paid by buyer

Any Questions, offers, please Call Bob Lasko nights, 203-834-0952. days 203-858-1952 or E-mail lasko@optonline.net

Last edited by Bob Lasko; 03-24-2013 at 04:19 PM.
Bob Lasko is offline   Reply With Quote