CLASS RACER FORUM - View Single Post

Hemi Moose · 11-20-2012, 02:55 AM

Here's today's installment of 'As The World Turns' soap story continues...I got an interesting private message from Mr. X today...so is there any truth to this rumor.

Quote: I've heard the issue is one of the teams (I believe it is RB) is milling the intake surface of the heads so much there is only 1/2 of the valve cover bolt hole remaining. They then put an adapter on the intake surface that the valve cover will lay on; there's only a couple of bolts holding the valve cover on. The adapter is akin to using a bolt on / extended exhaust port. On the intake side, the adapter will allow taller / straighter ports. That's the story I've heard! Those SS/AH guys have ego's I don't want to be around!

11-20-2012, 02:55 AM	#4
Hemi Moose VIP Member Join Date: Jan 2010 Posts: 2,824 Likes: 0 Liked 12 Times in 12 Posts	Re: superstock hemi heads Here's today's installment of 'As The World Turns' soap story continues...I got an interesting private message from Mr. X today...so is there any truth to this rumor. Quote: I've heard the issue is one of the teams (I believe it is RB) is milling the intake surface of the heads so much there is only 1/2 of the valve cover bolt hole remaining. They then put an adapter on the intake surface that the valve cover will lay on; there's only a couple of bolts holding the valve cover on. The adapter is akin to using a bolt on / extended exhaust port. On the intake side, the adapter will allow taller / straighter ports. That's the story I've heard! Those SS/AH guys have ego's I don't want to be around!