Re: 12 bolt yoke
I searched for a Yoke with the most clearance. Made Sure I had room to slip the D Shaft that much further into the trans. Then took both to a machine shop had the Race Pak Collar Machined with interference to fit the yoke. Fabricated the sensor holder. Went together fine. Getting sensor to collar clearance was critical on mine to get accurate readings. Once I got that right has worked great for years. The yoke I used I found on the internet it was not a strange or MW sorry cant remember name but TD comes to mine. I also used a internal Pinion seal meaning no exterior flange I ended up with about .060 clearance.
Hope this helps
Don
|