CLASS RACER FORUM - View Single Post - ANOTHER 2-Step wiring-in question !

Sean Marconette · 03-12-2012, 08:01 PM

I did not do a very good job in my first post. Series the switches on the fork in your case and one on the shifter for 1st gear. Both have to be made to engage the LL. Another set of switches on both fork and 1st gear for the 2 step. No relays are allowed. Release of LL and 2 step has to be from drivers foot, and cannot be released using your hands. This is for staging the car. The Burnout, with a stick and LL is a different discussion as 1st gear is not used for the burnout. If the switches are setup in series there should be no way to bounce both switches and re-engage the 2 step.

Hope this Helps.

Sean

03-12-2012, 08:01 PM	#6
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 794 Liked 275 Times in 76 Posts	Re: ANOTHER 2-Step wiring-in question ! I did not do a very good job in my first post. Series the switches on the fork in your case and one on the shifter for 1st gear. Both have to be made to engage the LL. Another set of switches on both fork and 1st gear for the 2 step. No relays are allowed. Release of LL and 2 step has to be from drivers foot, and cannot be released using your hands. This is for staging the car. The Burnout, with a stick and LL is a different discussion as 1st gear is not used for the burnout. If the switches are setup in series there should be no way to bounce both switches and re-engage the 2 step. Hope this Helps. Sean __________________ Sean Marconette 84 Mustang 5060 SS/N Last edited by Sean Marconette; 03-12-2012 at 08:13 PM.