CLASS RACER FORUM - View Single Post - 385" SBC, PUMP GAS engine, Street/strip 11.15@117

Brian Holcombe · 01-15-2007, 07:50 PM

For Sale:

Street/strip Pump gas

4.040" 4 bolt 010 casting block 3.75? Stroke crank= 385ci

The block was prepped by Windsor Automotive Machine (Paul Rock)
- The block prep included being decked to 9.03"
- Line honed mains, Bores honed with a deck plate

-SRP Forged Pistons #138094 with Plasma Moly file fit rings
-9.85:1 CR Completely pump gas capable
-Clevite 77 bearings
-Fel-Pro Gaskets
-Eagle Cask Crank 3.75" Stroke External balanced by Performance machine
-Crower Sportsman 6? cap screw Rods
- All bolts internal and external are ARP, with exception to the rod bolts which are Crower.
-Milodon louvered Windage tray, and Milodon oil pan (Stock style)
-Melling Standard oil pump, Heavy casting design with pickup epoxied and staked.
-Cloyes true Roller timing set
-World Products Sportsman II 200cc intake port heads 72cc combustion chambers fitted with Race Flo 2.02/1.60 valves bowl blend
All the valves (brand new) were resurfaced, and back cut.
Head work included a bowl blend and 3-angle (3 seat angles and a back cut) competition style valve job
-Performer RPM intake manifold
-Crower Cams #00321 (Ground on a 108LSA) Solid Flat tappet 242/248 Dur .050? .482/.504" valve lift Crane double Valve Springs #99893-16
-Rocker Arms- Crower Stainless Steel 1.5
-Comp One Piece .080? wall 5/16? Pushrods
-Headers- 1-5/8? primary 3? collector, 33? average primary tube length
Scavenger style collector
-Steel damper

This engine has 96 1/4 mile passes on it, and less then 3000 street miles.

It has gone 11.15 at 117.5 MPH in a 3210lbs 67' Camaro.

Comes complete, less distributor, waterpump, alternator and carb. (carb is negotiable).

$4,800
Interested in Stacks of Paper ONLY, no trades.

Hear it run prior to purchase.

[image]http://i27.photobucket.com/albums/c181/SpeedyGoomba/P1010035.jpg[/image]

01-15-2007, 07:50 PM	#1
Brian Holcombe Junior Member Join Date: Feb 2004 Location: Hamilton NJ Posts: 68 Likes: 0 Liked 0 Times in 0 Posts	385" SBC, PUMP GAS engine, Street/strip 11.15@117 For Sale: Street/strip Pump gas 4.040" 4 bolt 010 casting block 3.75? Stroke crank= 385ci The block was prepped by Windsor Automotive Machine (Paul Rock) - The block prep included being decked to 9.03" - Line honed mains, Bores honed with a deck plate -SRP Forged Pistons #138094 with Plasma Moly file fit rings -9.85:1 CR Completely pump gas capable -Clevite 77 bearings -Fel-Pro Gaskets -Eagle Cask Crank 3.75" Stroke External balanced by Performance machine -Crower Sportsman 6? cap screw Rods - All bolts internal and external are ARP, with exception to the rod bolts which are Crower. -Milodon louvered Windage tray, and Milodon oil pan (Stock style) -Melling Standard oil pump, Heavy casting design with pickup epoxied and staked. -Cloyes true Roller timing set -World Products Sportsman II 200cc intake port heads 72cc combustion chambers fitted with Race Flo 2.02/1.60 valves bowl blend All the valves (brand new) were resurfaced, and back cut. Head work included a bowl blend and 3-angle (3 seat angles and a back cut) competition style valve job -Performer RPM intake manifold -Crower Cams #00321 (Ground on a 108LSA) Solid Flat tappet 242/248 Dur .050? .482/.504" valve lift Crane double Valve Springs #99893-16 -Rocker Arms- Crower Stainless Steel 1.5 -Comp One Piece .080? wall 5/16? Pushrods -Headers- 1-5/8? primary 3? collector, 33? average primary tube length Scavenger style collector -Steel damper This engine has 96 1/4 mile passes on it, and less then 3000 street miles. It has gone 11.15 at 117.5 MPH in a 3210lbs 67' Camaro. Comes complete, less distributor, waterpump, alternator and carb. (carb is negotiable). $4,800 Interested in Stacks of Paper ONLY, no trades. Hear it run prior to purchase. [image]http://i27.photobucket.com/albums/c181/SpeedyGoomba/P1010035.jpg[/image]