CLASS RACER FORUM - View Single Post - 450HP pump gas SBC

Brian Holcombe · 01-24-2007, 12:11 PM

This is it, it ethier sells or i hang onto it for a future project, if anyone is waiting for me to give up and give it away, keep waiting cause it aint gonna happen :wink:

Complete 385 Stroker Engine

What is included:

450HP 385cid Chevrolet small block
Flowtech headers with custom collectors
Meziere 55gpm street/strip electric water pump

Internal Specifications:

Block: Seasoned 4-bolt GM 010 Casting (2pc rear)
Crank: 3.75" Eagle Cast Steel crank
Rods: 6.0" Forged crower sportsman
Pistons: 4.040" SRP forged 1/16" Ring design
Gaskets & Bearings: Clevite & FelPro
Cylinder heads: 200cc Sportsman II iron heads
Intake:Edelbrock RPM
Camshaft: Crower solid flat tapped 242/248 duration
Oil System: Milodon pan, P/U, and Melling Pump
Timing Chain: Cloyes True Roller
Valve Covers: Moroso with moroso breathers
Valve train: Crower stainless Roller rockers & Comp heavy wall Pushrods
Balancer: Pro.Series External balance
Flexplate: External balance SFI

Machine work and assembly performed by Windsor Automotive machine.
This engine is nearly brand new, and was built entirely with brand new parts (Except the block), after a handful of drag strip passes, and 3000 street miles its being replaced by a big block.

Take advantage of an excellent deal which includes the Headers exact combo (Capped with exhaust!) has gone 11.15 @ 117.

Hear the engine run prior to purchase, and i will remove the engine at the time of purchase.

NOT INCLUDED:Alternator and bracket, crank pulley, Distributor, Starter, carb, carb spacers.

$3,450
Interested in Stacks of Paper ONLY, no trades.

[image]http://i27.photobucket.com/albums/c181/SpeedyGoomba/P1010035.jpg[/image]

I have No problem giving all the required info for the buyer to get the right carb/converter.....however the current ones will not/cannot be included in the deal.
Patrick James (pro systems) are excellent guys to deal with and they will duplicate the carb, and i will unveil all my tuning information.
ATI can duplicate the same converter, since i will supply the serial number if so requested.

01-24-2007, 12:11 PM	#1
Brian Holcombe Junior Member Join Date: Feb 2004 Location: Hamilton NJ Posts: 68 Likes: 0 Liked 0 Times in 0 Posts	450HP pump gas SBC - LAST PRICE REDUCTION This is it, it ethier sells or i hang onto it for a future project, if anyone is waiting for me to give up and give it away, keep waiting cause it aint gonna happen :wink: Complete 385 Stroker Engine What is included: 450HP 385cid Chevrolet small block Flowtech headers with custom collectors Meziere 55gpm street/strip electric water pump Internal Specifications: Block: Seasoned 4-bolt GM 010 Casting (2pc rear) Crank: 3.75" Eagle Cast Steel crank Rods: 6.0" Forged crower sportsman Pistons: 4.040" SRP forged 1/16" Ring design Gaskets & Bearings: Clevite & FelPro Cylinder heads: 200cc Sportsman II iron heads Intake:Edelbrock RPM Camshaft: Crower solid flat tapped 242/248 duration Oil System: Milodon pan, P/U, and Melling Pump Timing Chain: Cloyes True Roller Valve Covers: Moroso with moroso breathers Valve train: Crower stainless Roller rockers & Comp heavy wall Pushrods Balancer: Pro.Series External balance Flexplate: External balance SFI Machine work and assembly performed by Windsor Automotive machine. This engine is nearly brand new, and was built entirely with brand new parts (Except the block), after a handful of drag strip passes, and 3000 street miles its being replaced by a big block. Take advantage of an excellent deal which includes the Headers exact combo (Capped with exhaust!) has gone 11.15 @ 117. Hear the engine run prior to purchase, and i will remove the engine at the time of purchase. NOT INCLUDED:Alternator and bracket, crank pulley, Distributor, Starter, carb, carb spacers. $3,450 Interested in Stacks of Paper ONLY, no trades. [image]http://i27.photobucket.com/albums/c181/SpeedyGoomba/P1010035.jpg[/image] I have No problem giving all the required info for the buyer to get the right carb/converter.....however the current ones will not/cannot be included in the deal. Patrick James (pro systems) are excellent guys to deal with and they will duplicate the carb, and i will unveil all my tuning information. ATI can duplicate the same converter, since i will supply the serial number if so requested.