CLASS RACER FORUM - View Single Post

old time racer · 04-19-2007, 08:45 PM

SS 327/275/295 motor complete pan to intake
w/dyno sheets
Bowtie block
heads up heads & intake
JE litened pistons
manley rods
mouldex crank w/all the tricks
50MM comp cam/4-7 swap
comp lifters ford dia.
ferrea valves w/comp ***. retainers&radial locks
comp spec. springs
7/16 pushrods
jesel rockers
MSD frt. drive dist.& crank trigger
CSR water pump
ATI damper
Moroso big kickout pan & moroso fab. V covers
stewart racing oil pump
cometic head gaskets

If serious I will give more details about other info on motor & have more parts avail.$8500 bottom line

If car is sold without all parts we have2 fresh transw/shields,spare 9"ford alum. center complete,4 conv.,3 carbs,B/G pumps,reg. ign. cams,lifters,starters,jesel rockers,& more

contact ronnie smith here or call me at 304-545-7675

old time racer

04-19-2007, 08:45 PM	#1
old time racer Junior Member Join Date: Dec 2004 Location: USA Posts: 4 Likes: 0 Liked 0 Times in 0 Posts	SS motor SS 327/275/295 motor complete pan to intake w/dyno sheets Bowtie block heads up heads & intake JE litened pistons manley rods mouldex crank w/all the tricks 50MM comp cam/4-7 swap comp lifters ford dia. ferrea valves w/comp ***. retainers&radial locks comp spec. springs 7/16 pushrods jesel rockers MSD frt. drive dist.& crank trigger CSR water pump ATI damper Moroso big kickout pan & moroso fab. V covers stewart racing oil pump cometic head gaskets If serious I will give more details about other info on motor & have more parts avail.$8500 bottom line If car is sold without all parts we have2 fresh transw/shields,spare 9"ford alum. center complete,4 conv.,3 carbs,B/G pumps,reg. ign. cams,lifters,starters,jesel rockers,& more contact ronnie smith here or call me at 304-545-7675 old time racer __________________ I am a racer of 30 years,in the sportsman ranks,have 2 world championships,lots of records,etc.I work for a manuf. as there race director,I have managed 2 tracks& I have been to every race &track there is.