Quote:
Originally Posted by StockerRook
Got my motor all buttoned up and put in the car. The only thing i have left is figure out is which injectors i need to run.
Will the stock injectors work (24 lb. I think ?) or do i need to upgrade to a slightly larger injector (Around 30 lb.)
The car has a BS3 management system.
I apologize in advance for my lack of knowledge. Any help would be appreciated.
Chris
Just a couple pics of the painted engine bay.
|
WOW big issue discussed a lot on LT1/LS1 and impalassforum.com.
The 24# injector seems to work well with 350's with just about any cam.
Fuel Pressure can be cranked to 55psi to meet demand.
I use a PCM and tune with LT1 Edit or TunerCat.
Some move up to 26# Injectors but most stick with the 24#er's.
30lb Injectors are used when our
www.ECIRS.org racers move up to 383/396/409 LT1 engines and or power adders.
If you have a PCM and Laptop,
FreeScan is available to help tune the engine by recording a run.
I use a Walbro High Capacity Fuel Pump, far more than the car needs.
Infact may go back to the stock pump.
D