03-27-2011, 08:36 PM
|
#7
|
|
Senior Member
Join Date: Feb 2004
Location: Saint John NB Canada
Posts: 561
Likes: 30
Liked 6 Times in 5 Posts
|
Re: The "Answer" brake pressure switch
Quote:
Originally Posted by Lew Silverman
George,
The kit includes just the switch, and of course the schematics/instructions.
It installs in the rear brake circuit, preferably close to the master cylinder.
Two wire hook-up, 1 to the two-step and 1 to either 12 positive or negative, depending on your ignition system. It's recommended that a N/C switch be wired in the power circuit to prevent activation in high gear at the finish line.
No adjustment really - pumping the brakes feeds power to the two step, let go of the brakes, hang on!
I'm changing from a single- to a double circuit master cylinder, so this was a good time to plumb in a switch.
Good Luck!
Lew
|
What is a N/C switch Lew ?
|
|
|