CLASS RACER FORUM - View Single Post

Mark Yacavone · 05-28-2009, 01:11 AM

Alan ,it doesn't really matter if the check ball is there or not. If you're feeding both sides of the direct piston (center seal out and /or center ring on the pump removed) The reverse passage has to be blocked off someway. Either at the pump to case face or with the VB spacer plate feed blocked off. Have you checked that?

05-28-2009, 01:11 AM	#11
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,821 Likes: 2,912 Liked 5,133 Times in 1,957 Posts	Re: Need Help 200 Metric Question Alan ,it doesn't really matter if the check ball is there or not. If you're feeding both sides of the direct piston (center seal out and /or center ring on the pump removed) The reverse passage has to be blocked off someway. Either at the pump to case face or with the VB spacer plate feed blocked off. Have you checked that? __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers