CLASS RACER FORUM - View Single Post

ron mattson · 02-16-2009, 05:37 PM

tom is right if you want a serious chrome type finish you will need to use some type of rouge, the
3m discs will get you to a very fine satin finish with no surface defects. if you go over the welds with
a tig torch after this process it leaves a very cool blue weld at each joint that looks great just remember
to inner purge with argon or similar gas to keep the inside free of contamination..

02-16-2009, 05:37 PM	#4
ron mattson Member Join Date: Nov 2005 Location: cloquet mn Posts: 467 Likes: 17 Liked 67 Times in 30 Posts	Re: HELP Polishing SS Headers tom is right if you want a serious chrome type finish you will need to use some type of rouge, the 3m discs will get you to a very fine satin finish with no surface defects. if you go over the welds with a tig torch after this process it leaves a very cool blue weld at each joint that looks great just remember to inner purge with argon or similar gas to keep the inside free of contamination..