intake gasket sealing?
 

has anyone used contact cement to hold intake gaskets in place?
I have 2 problem areas. divider wall & top of port.

thanks Rod in AZ.

Re: intake gasket sealing?
 

First I would check whether there is any gap one place vs. another meaning the heads or intake need to be "squared" and resurfaced. K&W Coppercoat spray stays sticky for days and would work well. It can be removed with lacquer thinner.

Re: intake gasket sealing?
 

Best stuff is Permatex HYLOMAR M or equivalent--Patterson uses it on all their engines---FED 387

Re: intake gasket sealing?
 

good tip thanks. Rod in AZ