Ignition Box Mounting
 

Where are you guys mounting your ignition boxes on your Stockers? Just looking for ideas. Thank you

Re: Ignition Box Mounting
 

I’ve seen a lot of Chevy’s in the passenger footwell. Probably goes with the shorter wiring and don’t get it wet comments. I have a Ford and I think it’s going under the hood when I mount it but like you I’m open for ideas?
Also check out Bobby Fazio video interviews where he shows the interior, under hood and in the truck of a lot of cars, some good stuff there!

Re: Ignition Box Mounting
 

6AL is above>


https://i.postimg.cc/hvwLcvK3/100-1965s.png

https://i.postimg.cc/9fRtgGVw/20230815-180644.jpg

Re: Ignition Box Mounting
 

Our mopars are mounted behind the glove box
or right below in that general area.

Re: Ignition Box Mounting
 

Good morning to all,
I mounted my MSD on the passenger side toe board. Mostly because its convenient in case I have to service it. MSD recommends that the box/ ignition controls be placed where air can move around it and cool it. That's why they don't recommend putting it a "glove box" or enclosed location.

Respectfully,
Henry Kunz 1534 H/SA

Re: Ignition Box Mounting
 

Behind our Glove box door there is no longer a real actual
glove box or a heater box. It is totally open to air flow.
Sorry I was not clearer. It is protected from weather
inside car and some of outside heat out is mitigated a bit
as we live in Nevada.

Re: Ignition Box Mounting
 

IMHO, I put mine on the passenger side underneath the glove box on a hinged panel. Relay switch panel on the topside with all race-related wiring - MSD components on the underside. Coil mounted on the inside of the firewall just above the hinged panel.


Hinged panel allows for easy access while keeping it out of the way when racing. MSD on the underside allows easy access to MSD box settings and RPM chips (if you use them).

Re: Ignition Box Mounting
 

Dave gets my vote, very nice. Do you hire out? Lol

Re: Ignition Box Mounting
 

I can barely afford myself :-) All for the love of the hobby

Re: Ignition Box Mounting
 

We did the same. Mounted the shift light dial on the inside of the glovebox door too. We were hesitant to put it on the floor or kick panels with kids and friends riding in the car for warmup and heading to the lanes.

https://www.classracer.com/classforu...7&postcount=84