Custom AN fittings
 

Is there anyone making custom AN fittings? I could use a 90 degree bulkhead fitting but with a longer straight side in -10.

Re: Custom AN fittings
 

Is this what you're looking for ? Jegs # 110264

Kenney Kelley

Re: Custom AN fittings
 

I didn't search for the specific fitting that you are looking for, but as another source, Parker has a huge selection of all types of fittings.

https://divapps.parker.com/divapps/t...n/select-shape

Re: Custom AN fittings
 

That’s the correct type of fitting.What I need is the long end to be able to pass through a 1” wide piece of square tubing.It’s really hard to tell from the pictures how long that end is, but it may be worth a try.

Re: Custom AN fittings
 

I also looked at the Allen Aircraft Catalog and i didn't see anything long enough that would work because most of the time i've used those fittings on high pressure panels that the material is only 1/4" at the most. You could call Allen Aircraft and see if maybe they have a suggestion.

Kenney Kelley

Re: Custom AN fittings
 

Thanks , I’ll give that a shot.I’m kind of surprised one of the AN manufacturers hasn’t addressed this.It’s basically just a through the frame bulkhead.

Re: Custom AN fittings
 

You might try contacting one of these fellows. They make and sell a lot of AN hoses for aircraft. One of their specialties is making custom fittings. They had separate companies, thus the differing email addresses, but have joined forces recently.

Aircraft Specialty Flightlines

https://www.aircraftspecialty.com/

Steve: AIRCRAFTSPECIALTY@GMAIL.COM

Tom: TSFLIGHTLINES@GMAIL.COM

Re: Custom AN fittings
 

Re: Custom AN fittings
 

Thanks for all the replies. I truly appreciate your help.