CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   coolant passage (https://classracer.com/classforum/showthread.php?t=80548)

Weekend Racer 10-07-2021 08:07 AM
coolant passage
 
On sbc chevy heads casting 441 ,Before angle milling heads ,do the spark plug coolant passage be plugged with epoxy .What your thoughts?

Mike Taylor 3601 10-07-2021 09:53 PM
Re: coolant passage
 
If plugging those holes thread them and plug with bolts and loc tite or taper plugs...

Tom Broome 10-13-2021 06:41 PM
Re: coolant passage
 
Quote:
Originally Posted by Mike Taylor 3601 (Post 649546)
If plugging those holes thread them and plug with bolts and loc tite or taper plugs...
This is the right way to do the job.
If you're unsure where to get the plugs and corresponding taps, check Goodson: https://goodson.com/products/crack-repair-plugs


All times are GMT -4. The time now is 04:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.