CLASS RACER FORUM - WTB: 1/4 inch gasket material

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Race Parts: Classifieds (https://classracer.com/classforum/forumdisplay.php?f=12)

- - WTB: 1/4 inch gasket material (https://classracer.com/classforum/showthread.php?t=79182)

WTB: 1/4 inch gasket material

Looking for some 1/4 inch gasket material to make some carb base gaskets for my wcfb carbs. Must be at least 5 inches by 6 1/2 inches. thanks Pm me or 815 8four 8 5zero 20

Re: WTB: 1/4 inch gasket material

Quote:

Originally Posted by Lyn Smith (Post 639695)

Looking for some 1/4 inch gasket material to make some carb base gaskets for my wcfb carbs. Must be at least 5 inches by 6 1/2 inches. thanks Pm me or 815 8four 8 5zero 20

The thick carburetor gaskets are made of a compressed Composite Nitrile Butadiene. Fel Pro and Mr.Gasket only has thin material.

One source for the material sheet is Accurate Felt & Gasket. You need Nitrile Butadiene material and see if the have it with a steel core. They may suggest something that will work also. They make lots of the gasket material for the aftermarket. You can call them and explain what you need and they may even send you a free sample.

https://www.afgco.com/fibre-cellulose