CLASS RACER FORUM - garage space

15* sbc 363 casting cncported,barillium seats, delwest ti valves,retainers,beadlocks,springs,Jesel rockers with srands,8 dynopulls from new by Chapman.3900.00

23*sbc world products s/r heads,2.020 I 1.600 ex stainless valves,springs,retainers, keepers, complete nice heads, 500.00 pair

sbc Bowtie 286 block 4.125 bore, 8.840 deck, bushed lifter bores, 350 mains, billit main caps with studs, good used block. 1400.00

sbc Bowtie 184 block, 4.000" bore,8.855 deck, stock lifter bores, 350 mains,really nice block.1800.00

sbc rodeck aluminum block, 4.060 bore, 400 main, 8.945 deck, no issues.2500.00

sbc world products pbm aluminum block, Brand New, 4.125 bore, 9.025 deck,350 main. 3800.00

Richmond 4.56and 6.20 9" gears. 150.00 each

Littlefield 671 blower, hard anodized case, rotors, and end plates, stripped all three sides, enderle bug catcher, blower restraint, moonyham manifold, five pullies, tensioner, two belts, 8 new je pistons 4.060, pins, rings

new in the box engle blower cam. 3900.00

New JE stocker pistons, 4.060, 1.650 ch, pins, NHRA etched.450.00

New Ross forged pistons for SB2 street engine, dished, 4.125, 1.341 ch. 600.00

New Schneider SB2 street roller cam- 236-248 @ .050, 110 cl, .570 lift.500.00

New in the box Dan Olsen sry sump aluminum pan sbc. 600.00

Turbo 350 race trans, trans brake, clean neutral, 252 low, aluminum drum,A-1 7" converter stalls 6800 great for GT classes, csr shield, PPP black anodized shifter, digital shift box. 4500.00

SBC Henry Velasco billit 2.750 stroke, brand new, his top fuel material, 350 main, 2" rod. 1900.00

Eleven other cranks, various strokes, call I might have what you need.

Four sets of used aluminum rods, 2" and 2.100" rods, 6", 5.740, 5.57, 5.980. 200.00 each

Call Bob @ 928-899 7082