Mopar wedge motor garage clean up
 

All of these parts came from motors used in S/Gas or S/Comp
2 sets of Comp Cam offset roller lifters for spay bar valve covers (they do not oil thru pushrods)
1 set has 8 freshly rebuilt lifters $175
other set $120
4 pair of Comp Cam Elite roller lifters part# 98829 (I only have center pucks)$120
All the lifters are in good condition

New set of Smith Bros pushrods 3/8 x .120 wall 10.300 long with 5/32 ball ends $130
used Comp Cam pushrods .080 wall with 5/32 ball ends $5 each
9 part # 8705 10.000 long
17 part# 8713 10.400 long

1 set of GRP Pro material alum rods 7.065 with around only 45 passes with Diamond 4.560 pistons with around 100 passes. Text me for more specs and make offer
1 set of CP pistons 4.600 with only around 45 passes Text me for specs and make offer
Also have a Callies billet 4.75 Crank mains are .020 and rods are .010 (SOLD)
Text me for more details
Have a used set of Dana 4.10 gears that came out of 69 Dodge RT $100
Used Contender Performance HD throttle controller with solenoid controller that we only used one season on a 2 four set up $100
NEW PARTS:
MSD 7AL-3 $625
Dedenbear Air Solenoid kit part # SOL-4 $110

Buyer pays shipping
phone # seven one two two five three 4190
email: gtscrose@longlines.com
will accept paypal