CLASS RACER FORUM - 305 crankshaft {stocker)

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)

- - 305 crankshaft {stocker) (https://classracer.com/classforum/showthread.php?t=75004)

305 crankshaft {stocker)

can anyone tell me the crankshaft weight
the one in my motor weights 54 lbs.

thanks

Re: 305 crankshaft {stocker)

You didn't say who made it, but you should check the rulebook: "Stock OEM or NHRA-accepted aftermarket crankshaft mandatory. Aftermarket crank must retain OEM configuration (i.e., billets, knife edging, etc. prohibited). Lightening of crankshaft other than normal balance job prohibited. Aftermarket SFI Spec 18.1 harmonic balancer mandatory in AAA/S through G/S and AAA/SA through G/SA. See General Regulations 1:2. "
….and you can sort through the link below
Good Luck and Merry Christmas

http://www.nhraracer.com/Files/Tech/...edProducts.pdf

Re: 305 crankshaft {stocker)

Umm, not for nuthin' but check out a 267 crank.

Re: 305 crankshaft {stocker)

Quote:

Originally Posted by Billy Nees (Post 604554)

Umm, not for nuthin' but check out a 267 crank.

If this man says it,, you better listen and look. Don Jackson