WANTED: 8" converter to get 6300 behind 355sbc
 

Need good 8" converter to work with 3000 lb footbrake car. 355 sbc making 630hp / 480tq. TH350 trans w/ stock gearing. Shifting at 8000. 26x10 tire/4.30 gear for now. Will add more gear as needed.

Re: WANTED: 8" converter to get 6300 behind 355sbc
 

I believe I have 1 Munsinger converter that was 6100 behind 400 SBC with 400T and 4.30 gear with 30 tall tire. 10.04 at 131.5 MPH Weight was 3360. I could double check to make sure they are 8 inch but I'm in AZ. Also a Hughes 5800 in same car went 10.15 @ 130 MPH

Re: WANTED: 8" converter to get 6300 behind 355sbc
 

can you get me the numbers on it? How heavy was the car?

Re: WANTED: 8" converter to get 6300 behind 355sbc
 

I have a couple of 8 inch that might thr bill. Both ATIs. PM me and I'll send what ever info you want or a phone number. Thanks

Re: WANTED: 8" converter to get 6300 behind 355sbc
 

It wont let me PM, Mike....?

Re: WANTED: 8" converter to get 6300 behind 355sbc
 

let me check to see if anything came.

Re: WANTED: 8" converter to get 6300 behind 355sbc
 

Your not gonna find and 8 inch that loose.
7 inch converter yes. Good luck

Re: WANTED: 8" converter to get 6300 behind 355sbc
 

I have a 8 inch...was behind a 355. It had. 5500. Stall. Lmk if you interested. 484 877 1783

Re: WANTED: 8" converter to get 6300 behind 355sbc
 

I did sell the Munsinger. The Hughes measured 9 inches on the outside and has the following numbers
C7SC+ 1/8

400 c x-5 B110

Re: WANTED: 8" converter to get 6300 behind 355sbc
 

Casrac7
I did get your PM and sent reply, at least that's what the out box tells me. If it helps one converter was 6100 and then other was 6300 ATI inch. See if you got the PM reply. Thanks