Metric 200 dip stick
 

Who makes a good dip stick for a metric 200? TIA

Re: Metric 200 dip stick
 

Masta performance

Re: Metric 200 dip stick
 

Lokar

Re: Metric 200 dip stick
 

Lokar is a good one. Double check the markings on the dipstick, though. -Al

Re: Metric 200 dip stick
 

Lokar is nice because of its flexibility ,However they do fill very slowly .
As Alan said check the calibration . It doesn't matter who makes them every one I've ever checked was wrong.
Here's a bulletin from Turbo Action on the correct calibration

Re: Metric 200 dip stick
 

Jack Sepanek, he will make one that is accurate

Re: Metric 200 dip stick
 

Good to know as I have to drop my pan as it leaks from the cork gasket I installed dry.

Re: Metric 200 dip stick
 

If you use a LOKAR, you may have trouble installing on the trans end. The plate between the case and valve body on my metric 200 was sticking out and preventing the installation. I had to drop the pan, valve body, and plate and trim the plate. Just had to trim the corner off the plate.