CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Paul ditchers looking for lifters (https://classracer.com/classforum/showthread.php?t=58225)

philip a harnden 05-31-2015 05:34 PM

Paul ditchers looking for lifters
 
Paul is looking for new smith lifters ( stock) for 400 cu in pontiac. Does any one have any??. Contact paul ditcher brockport ny

John Duzac 05-31-2015 05:53 PM

Re: Paul ditchers looking for lifters
 
Paul, whatever you do, do not buy Smith Lifters! They will fail and ruin your engine. Tool steel lifters work well for my application. Do some research and I think you will be better off not using Smith lifters. I have 14 of them for a Chevrolet 302. Ticking time bomb!

Ed Wright 05-31-2015 05:57 PM

Re: Paul ditchers looking for lifters
 
Sherman.

D. Hake 4459 05-31-2015 09:06 PM

Re: Paul ditchers looking for lifters
 
x2 for the tool steel lifters. The ceramic faced lifters were ok when there was nothing else available but now that there are tool steel lifters that can handle a lot of spring pressure I wouldn't use anything else. Like John said, a ticking time bomb, and when one goes the short block is gone. PPPC and Trend are good examples of tool steel lifters. Not meaning to bash the Smith/Schubeck style lifters, just my .02.

ron mattson 05-31-2015 11:08 PM

Re: Paul ditchers looking for lifters
 
If they are the same as Chevy I have some.

SSDiv6 05-31-2015 11:11 PM

Re: Paul ditchers looking for lifters
 
Quote:

Originally Posted by ron mattson (Post 472317)
If they are the same as Chevy I have some.

Chevy lifters have a different oil band than Pontiac/Olds lifters.

Agree, get the Sherman lifters.

Adger Smith 06-01-2015 08:51 AM

Re: Paul ditchers looking for lifters
 
I have several hundred lifter bodies that I had built several years ago. They are DLC coated and are shorter for a larger root diameter cam. They weigh less than a stock lifter, too. You could have Sherman do his mods to them and have a pretty trick piece. I'll make someone a deal on them. They might work for Paul's application.

Capri 06-01-2015 07:06 PM

Re: Paul ditchers looking for lifters
 
I happen to have a set of them Smith lifters on the shelf. I may have the Sherman also........

Alex Denysenko 06-01-2015 08:15 PM

Re: Paul ditchers looking for lifters
 
Quote:

Originally Posted by Capri (Post 472391)
I happen to have a set of them Smith lifters on the shelf. I may have the Sherman also........

Yes we do have BOTH Smith's and Sherman hydraulic lifters for a Pontiac V-8 in stock one set of each only so first come first served
call the shop during the day no PM's please as we're not always logged in. 219-861-1214 CST or Tony's cell 708-214-1772 don't call my cell as I will be getting my final post surgery exam and therefore incommunicado.


All times are GMT -4. The time now is 03:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.