CLASS RACER FORUM - Intake Manifold Heat Shield

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)

- - Intake Manifold Heat Shield (https://classracer.com/classforum/showthread.php?t=56051)

John Scott

12-16-2014 08:16 PM

Intake Manifold Heat Shield

I have a chance to buy a 3973469 (1971 350/270) intake manifold but the heat shield is missing. Is this a big deal? Should I keep looking?

MAURICE BLENDHEIM

12-16-2014 09:14 PM

Re: Intake Manifold Heat Shield

John… No big deal. You can replace it with one from any cast iron small block intake if you find it necessary. On a race application crossover passage is usually blocked off where intake meets heads. Maurice.

Mark Yacavone

12-16-2014 09:21 PM

Re: Intake Manifold Heat Shield

Just use something like this:

http://www.summitracing.com/parts/mor-25050/overview/

I always notch the holes so you can remove the thing without taking all the push rods out.

John Scott

12-16-2014 09:21 PM

Re: Intake Manifold Heat Shield

Thanks Maurice and Mark.

All times are GMT -4. The time now is 09:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.