Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

We are in Hot Rod mag, check it out! We set the record for a normally aspirated Pontiac engine 1219.8HP/900TQ. Last week we were on again and we are much closer to 1300HP. 609 cubic inch all Pontiac engine, cast intake with a single 4 barrel.

www.ramairv.com or www.tunnelport.com

https://www.youtube.com/watch?v=ixRR...e_gdata_player

Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

Like :eek: ---Trevor

Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

L or M/SA ?:p

Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

Aaaaaaaaas/a

Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

Totally impressed! Will the intakes fit a stock RAV head? Bob Michael

Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

Thanks Bob, yes, but you must port match. It is single plane and we have made over 700HP on a pump gas street engine with our single 4 no porting. We made the head intake ports a bit smaller on ours, but they flow 50-60 cfm more.

Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

Thanks, Lynn. I have a friend that is building a Ram Air V '68 Firebird that is looking for a manifold. I''ll pass the word along. Loved that dyno pull; that was NASTY!!!!

Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

can you get GM to put a part number on them? PLEASE

Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

I thought that was Burton's stocker engine.

Re: Pontiac Tunnelport in Hot Rod Magazine, July Issue!
 

Funny, me too Larry, Only I thought that it was ship's or Glasbrenner,s?



Yo Lynn, have you guys got them approved for those bogus ultra charity 428's yet ?